Wilson Yagi 1800-1990 MHz PCS Antenna, 301124

The Wilson Cellular PCS Band Yagi Antenna's main benefit over our other antennas is its ability to focus its signal in one direction. This provides an advantage in weak signal areas or for repeater systems. This antenna is designed for use on stationary objects such as buildings. If this antenna is not aimed correctly it will lose its effectiveness.

The 17" boom is the main part of the antenna and includes 9 elements constructed of a single piece of 2mm (14 gauge) aluminum. The Wind Surface Area is less than 19 square inches. The design of the antenna exposes a small profile to wind and ice.

The output coaxial connector is an N-Female type and the feed systems is a "T-Match" which provides low signal loss and wide bandwidth. The antenna's impedance is 50 ohm with a maximum power rating of 25W.

Pipe mount hardware is included. The pipe mount is adjustable to accommodate pipes with an outside diameter up to 2".

Since the Yagi is a single band 1850MHz-1990MHz PCS antenna it will only work with Sprint PCS, T-Mobile or other carriers in PCS markets. It is not compatible with 800MHz/850MHz Cellular or Nextel/iDEN.

Cable

The antenna includes no cable. For a short run of 20' you can use our 20' RG-58 coax extension which has the appropriate connections for the Yagi. Please note that our other RG-58 cables can not be directly connected to the Yagi antenna.

For longer runs, we suggest using one of the lengths of LMR-400 Cable below. This cable is fairly stiff so if you plan on connecting the Yagi directly to your phone with an antenna adapter we suggest you also include an 5' RG-58 extension. The below cables may also be connected together using the N-Female to N-Female barrel connector.

The primary difference between RG-58 and LMR-400 is the dB signal loss. RG-58 loses approximately 12dB/100' while LMR-400 loses about 4dB/100' (which is a big difference).

LMR-400 Extensions Cables:

• 20' LMR-400 Cable
• 30' LMR-400 Cable
• 50' LMR-400 Cable
• 75' LMR-400 Cable
• 100' LMR-400 Cable

A phone adapter cable is required to connect Wilson Cellular antennas to your phone.

Features:

• Compatible with all 1850-1990MHz PCS Frequency bands
• Directional antenna
• Built-in ground plane
• Pipe mounting hardware included (does not include pipe)
• For fixed installations

Requires:

• Phone Adapter Cable: All Wilson Cellular Antennas require a phone adapter cable in order to connect to your cell phone
• Pipe: The agi comes with hardware to mount to a pipe.